DWYER 2006 6 InWC Differential Pressure Gauge

Product image may only be representative

CLEARANCE! Limited Quantity = 1 Available

This item is discontinued or no longer carried - if you need more than we have, contact us and we'll help you find a replacement.

2006 Magnahelic 0-6 Iwc

Manufacturer:	DWYER
Series:	2000 Series
Model	2006
Stock #:	11557
Dial Size:	4"
Case Type:	Plain
Case Material:	Aluminum
Primary Range:	0-6 InWC
Secondary Scale:	none
Gauge Type:	Differential
Connection Location:	Back & Side
Connection Size:	2 x 1/8"NPT
Lens Type:	Acrylic
Dry or Filled:	Dry
Wetted Parts:	Alum/Acrylic
Additional Info:
Country of Origin:	USA

Price: $40.00

In stock - Ships within 24 hours

Find Additional Range
Scale Combinations

Are you buying in volume?
An OEM or reseller?
Contact HJ Kirby
for special pricing!

Questions about this product?
Contact HJ Kirby

DWYER 2000 Series Differential Pressure Gauges
Select the SERIES 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

Product Features:
Easy to read gage through undistorted plastic face permits viewing from far away Patented design provides quick response to pressure changes means no delay in assessing critical situations Durable and rugged housing and high-quality components combine to provide longservice life and minimized down-time High accuracy option is twice as accurate as the standard Magnehelic® gage. Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale. Precision litho-printed scale is accurate and easy to read. Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft. Pointer stops of molded rubber prevent pointer over-travel without damage. "Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft. Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid. Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale. Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration. Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures. Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting. OVERPRESSURE PROTECTION Blowout plug is comprised of a rubber plug on the rear which functions as a relief valve by unseating and venting the gage interior when over pressure reaches approximately 25 psig (1.7 bar). To provide a free path for pressure relief, there are four spacer pads which maintain 0.023" clearance when gage is surface mounted. Do not obstruct the gap created by these pads. The blowout plug is not used on models above 180" of water pressure, medium or high pressure models, or on gages which require an elastomer other than silicone for the diaphragm. The blowout plug should not be used as a system overpressure control. High supply pressures may still cause the gage to fail due to over pressurization, resulting in property damage or serious injury. Good engineering practices should be utilized to prevent your system from exceeding the ratings of any component. O-ring seal for cover assures pressure integrity of case. Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.

Available Options:
ASF Adjustable Signal Flag HP High Pressure Option LT Low Temperatures to -20°F MP Med. Pressure Option SP Setpoint Indicator Scale Overlays Red, Green, Yellow, Mirrored or Combination, Specify Locations Mounting and Orientation A single case size is used for most models of Magnehelic® gages. They can be flush or surface mounted with standard hardware supplied. Standard gages are calibrated in the vertical position, and should be used in that position for maximum stated accuracy. Ranges above 17.5 in w.c. may be used at any angle, and should stay within specified accuracy, by simply re-zeroing. Ranges below 17.5 in w.c. should be ordered using the –TA tilt angle option with the angle specified. These characteristics make Magnehelic® gages ideal for both stationary and portable applications. A 4-9/16" hole is required for flush panel mounting. Complete mounting and connection fittings, plus instructions, are furnished with each instrument. AHU1 Furnished with attached surface mounting plate AHU2 Furnished with attached surface mounting plate and including A-481 installer kit (2 plastic static pressure tips and 7´of PVC tubing) CB Chrome bezel option: A chrome plated aluminum bezel for an aesthetically pleasing finish when mounting on metal surfaces such as control panels. FC Factory calibration certificate NIST NIST traceable calibration certificate SB Stainless steel bezel option: 304 stainless steel electro polished Ra 16 finished bezel SS Corrosion resistant brushed 304 stainless steel bezel

Applications:
Filter Monitoring Air Velocity with Dwyer Pitot Tube Blower Vacuum Monitoring Fan Pressure Indication Duct, Room or Building Pressures Clean Room Positive Pressure Indication

Manufacturer product datasheet

DWYER 2006 - 4" Dial - 0-6 InWC Differential Gauge

CLEARANCE! Limited Quantity = 1 Available This item is discontinued or no longer carried - if you need more than we have, contact us and we'll help you find a replacement.

2006 Magnahelic 0-6 Iwc

Shopping Cart: 0 Items

Your Wishlist: 0 Items

CLEARANCE! Limited Quantity = 1 Available

This item is discontinued or no longer carried - if you need more than we have, contact us and we'll help you find a replacement.